suphybrid1:start
Hybrid 1
| Question: How do I connect a Hybrid 1 to my mixer? |
|---|
| Answer: Follow the instructions in this .pdf document: How to connect a Hybrid1 |
| Question: Could you give us an explanation about the dip switch of C-BALANCE? |
|---|
| Answer: The R balance works as an N-1 and can be set with connecting the input and listening at the output. |
| When called in adjust the potentiometer until the lowest input signal is heared. |
| The C balance should be set to the situation that the Hybrid has the lowest influence on the bus that you listen to on the mixer. |
| So if you apply a testing signal to a different channel and move the fader of the Hybrid the signal at the output shouldn't change. |
| When this is okay you can fine adjust the R balance. |
| The easiest way is to use a 1khz 0dB test tone for both settings and a scope but it is also possible by listening and watching the VU meters. |
suphybrid1/start.txt · Last modified: 2021/04/29 16:43 by support