supairlab:start
This is an old revision of the document!
Table of Contents
Airlab support page
Needed software (Install as Administrator):
Software | Windows | MAC OS X | Manual | Driver | Info |
---|---|---|---|---|---|
Firmware Updatetool | v4.10 | N/A | - | Video AtLibUsbDfu.dll | |
Java 32 bits (Needed by Firmware update tool) (A) | Java X86 | - | - | - | - |
Visual Studio (Needed by Firmware update tool) (B) | Visual Studio | - | - | - | - |
Airence Firmware | v1.5 | - | TXT | - | - |
Airlab Meters | v1.9.1 (FW 1.5) | v1.7 (FW 1.5) | Driver | Wiki | |
Airlab Control Center | v3.1 (FW 1.5) | - | - | - | - |
Airlab Virtual Keyboard Mapper (Service) | v1.4 (FW 1.5) | - | - | - | |
D&R VoIP Connect Button | v1.0.227.0 | - | - | - | |
Channel Configuration | - | - | - | - | Video |
Airence SDK (CONTROL SURFACE ONLY!) | v1.2 | - | - | - | |
Airlab Firmware (EEPROM) | v2.04 | - | - | - | - |
(For the Airlab the AtLibUsbDfu.dll device in the device manager is shown as “Unknown Device”)
(A) NOTE: This application requires JAVA 32-bits to be installed. Please download and install the latest version first
(B) NOTE: Some users still receive the error message: Firmware update failed! Make sure console is connected and in bootloader mode, they are probably missing the Microsoft Visual Studio drivers
FAQ - Airlab
Software and Settings
Question: It isn't possible to change settings of my Airlab, the Airlab won't accept/apply my settings? |
---|
Answer: Link: please follow the steps at this link |
Question: My firmware update isn't working? |
---|
Answer: Link: please follow the steps at this link |
Question: How do I setup Aircast to work with my Airlab? |
---|
Answer: Link: please follow the steps at this link |
Airlab as remote control in Aircast |
Question: My Airlab (Airence) meters aren't working? |
---|
Question: How can I forward the meter information trough network? |
Answer: Link: please follow the steps at this link |
Question: My Meter software shows a distorted screen, what can be the problem? |
---|
Answer: Link: please follow the steps at this link |
USB
Question: What bit and sample rate settings are supported by the soundcards? |
---|
Answer: The soundcards in our mixers support 16 bit 32kHz, 16 bit 44kHz and 16 bit 48kHz |
Question: My USB Channel or other USB hardware isn't recognized, what should I do? |
---|
Question: When connecting the USB, I receive a message that the maxmimum services or end points are reached. How can I fix this? |
Answer: Link: please follow the steps at this link |
Question: Can I connect one of the four inserted or an extra USB channel to a seperate computer? |
---|
Answer: Link: please follow the steps at this link |
Microphone input
Telco or Voip
Question: How to use the Voip channel in my mixer? |
---|
Answer: please follow the steps at this link |
Question: How do I connect my Airlab to the RJ-11 of my phone line? |
---|
Answer: You'll have to order or solder a cable from XLR to RJ-11 like this schematic . They can be ordered here : |
On Air, Mic on, Fader start, GPO
Question: I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this? |
---|
Answer: Instructions can be found in this webpage: Fader start instructions |
Question: Do you have an SDK for the Airlabs Fader Starts that can be received trough RS232 / Com port? |
---|
Question: How can I receive the fader starts at the computer side if my software doesnt have a plugin? |
Answer: Link: please follow the steps at this link |
Repair, Modification
Question: What are the differences in versions? |
---|
Answer: Link: please read the info at this link |
Question: How should the Flatcables be connected in my Airlab? |
---|
Question: My Airlab has missing flatcables, empty connectors is that okay? |
Answer: Link: Airlab MK2 or DT Master wiring |
Answer: Link: Airlab DT added USB wiring |
Troubleshooting & Instructions
supairlab/start.1591282173.txt.gz · Last modified: 2020/06/04 16:49 by support