Table of Contents
Airmate support page
| Model: | Production year | |
|---|---|---|
| Airmate-USB | - | |
 |
||
| Brochure | Manual | - |
| - | Manual French | - |
FAQ - Airmate-USB 8 and 12 channel
Needed software (Install as Administrator):
| Needed Software | Windows 7  | Windows 8  | Windows 10  | Windows 11  | MAC OS X  | Linux | Manual & Info |
|---|---|---|---|---|---|---|---|
| D&R VoIP Connect Button | v1.0.229.0 | - | - | ||||
| Channel Configuration | - | - | - | Video | |||
| USBdeview | Remove all D&R .bat file (Copy to USBdeview folder) | - | - | Nirsoft (C) | |||
USB
| Question: What bit and sample rate settings are supported by the soundcards? |
|---|
| Answer: The soundcards in our mixers support 16 bit 32kHz, 16 bit 44kHz and 16 bit 48kHz |
| Question: My USB Channel or other USB hardware isn't recognized, what should I do? |
|---|
| Question: When connecting the USB, I receive a message that the maxmimum services or end points are reached. How can I fix this? |
| Answer: Link: please follow the steps at this link |
| Question: My Airmate is still with the previous USB configuration and they both receive the Program bus. Can they also receive the Auxilary send? How can I fix this? |
|---|
| Answer: Link: please follow the steps at this link |
Microphone input
| Question: How can I connect My mixer with Insert to a effects unit? |
|---|
| Answer: See this picture: |
 |
Telco or Voip
| Question: What are the Telephone Hybrid and Voip channel options and what can I connect to them? |
|---|
| Answer: Take a look at this picture: |
 |
| Question: How can I connect a (GSM) Hybrid to my Voip channel? |
|---|
| Answer: Connect the output from the Hybrid to the input of the Voip channel and the Cleanfeed output to the input of your Hybrid. Therefor you need to make a cable from the RJ11 connector to input connector on your hybrid: |
 |
| Question: How to use the Voip channel in my mixer? |
|---|
| Answer: please follow the steps at this link |
| Question: How do I connect a Hybrid 1 to my mixer? |
|---|
| Answer: Follow the instructions in this .pdf document: How to connect a Hybrid1 |
| Question: The incomming sound (Microphone) of my Voip channel isn't working, how can I solve this? |
|---|
| Answer: Microsoft is changing the Privacy settings to prevent for hacking in to the Microphone sound and listen to what you are saying. Check these settings: |
 |
On Air light, Mic on, Fader start, GPO
| Question: I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this? |
|---|
| Answer: Instructions can be found in this webpage: Fader start instructions |
Repair and Modification
| Question: What are the differences in versions? |
|---|
| Answer: Link: please read the info at this link |
| Question: How can I replace or repair a board in an Airmate? |
|---|
| Answer: Link: please read the info at this link |
