At the Airence USB channel you can set the Fader start from Continious to Pulse by changing Jumper J17.\\
{{ :faderstartinstr:airence_gpo_settings_usb.png?direct |}}\\
{{ :faderstartinstr:airence_gpo_settings_usb_b.png?direct |}}
\\
\\
At the Airence Telco channel you can set the Fader start from Continious to Pulse by changing Jumper J17.\\
\\
{{ :faderstartinstr:airence_gpo_settings_telco.png?direct |}}\\
\\
\\
At the Airence Extender channel you can set the Fader start from Continious to Pulse by changing Jumper J5.\\
\\
{{ :faderstartinstr:airence_gpo_settings_extender.png?direct |}}\\
{{ :faderstartinstr:airence_gpo_settings_extender_b.png?direct |}}\\

[[faderstartinstr:start|Return to Fader start instructions]]\\
\\
[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
\\
Go back to the [[SupAirlab:start|Airence]] support page.\\
\\