Differences

This shows you the differences between two versions of the page.

--- axumuserlevel:start [2019/04/30 10:06] – support
+++ axumuserlevel:start [2022/07/18 09:20] (current) – support
@@ Line 1: / Line 1: @@
 **__Question:__** How can I configure User Levels in the Axum? \\
 **__Answer:__** Link: [[axumuserlevel:start|follow the instructions on this page.]] \\
+\\
 =====How to configure User Levels in the Axum======
+\\
 {{ :axumuserlevel:download_backup.png?direct |}}\\
 It is recommended to first Download a backup of your existing settings before you start changing settings!\\
 This way you can always go back to a previous configuration.\\
+\\
 {{ :axumuserlevel:t_10600391-chipcard_20181128144417.png?direct |}}
 I think the easiest way is to switch user levels with different chip cards.\\
+\\
 {{ :axumuserlevel:console1-4-users.png?direct |}}
 First of all be sure to create an Administrator account that can control everything.\\
 This can be done at the users page shown in constol1-4-users.png\\
+\\
 {{ :axumuserlevel:user_levels.png?direct |}}
 The username and password can then be written to the chipcard for example so you can switch to the user that can use everything.\\
+\\
 {{ :axumuserlevel:console1-4_surface_config_node_uicrmp-1.png?direct |}}
 At the Surface configuration you can now disable options for Operators and Supervisor.\\
+\\
 {{ :axumuserlevel:console1-4_surface_config_node_uicrmp-2.png?direct |}}
 __At the UI-CRMP be sure that the chipcards options (Number 1086 to 1088) are available to all users.__ \\
 __If you set this to Not available you won't be able to login with the chipcard in that situation.__ \\
+\\
 {{ :axumuserlevel:console1-4_surface_config_node_uicrmp-1.png?direct |}}
 The Supervisor can be configured with less options to Yes.\\
+\\
 {{ :axumuserlevel:console1-4_surface_config_node_uicrmp-2.png?direct |}}
 The Operator can then be configured less options then the Supervisor.\\
+\\
 {{ :axumuserlevel:console1-4_surface_config_node_ui-4fbp-3.png?direct |}}
 The Idle row is the situation without any users logged in, unknown for users that have a not matching name and password.\\
+\\
 {{ :axumuserlevel:console1-4_surface_config_node_ui-4fbp-4.png?direct |}}
 By default the settings for all users are set to Y(es).\\
+\\
 =====Once again be very careful cause setting the wrong options can lock up everything.=====
+\\
 =====And be sure that you'll configure the 3 chipcard functions as available for all users!!=====
+\\
 {{ :axumuserlevel:console1-4_surface_config_node_uicrmp-2.png?direct |}}
 __At the UI-CRMP be sure that the chipcards options (Number 1086 to 1088) are available to all users.__ \\
 __If you set this to Not available you won't be able to login with the chipcard in that situation.__ \\
+\\
-[[https://www.d-r.nl/support-request.html|Support Request]]
+[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
+\\
-[[SupAxum:start|Go back to the Axum Wiki]]
+[[start:|{{:iconhome.png?100|Home}}]][[SupAxum:start|{{:iconback2.png?100|Back}}]]
+\\